Clevo M7x0k now has a special edition for these Windows versions: Windows 7, Windows 7 64 bit, Windows 7 32 bit, Windows 10, Windows 10 64 bit, Windows 10 32 bit, Windows 8,Windows 10 S 64bit, Windows 7 Starter 64bit, Windows 10 Enterprise 64bit, Windows RT 64bit, Windows Vista Home Basic 32bit, Windows 10 Mobile Enterprise 32bit, Windows 10 Enterprise LTSB 64bit, Windows 8 Enterprise 32bit, Windows 7 Enterprise (Microsoft Windows NT) 32bit, Windows 8 Pro 32bit, Windows 8 64bit, Windows 7 Ultimate 32bit, Windows 10 64bit.
Date VersionNote2006.07.181.0181. Update OFDM parameter.2. Update dynamic initial gain setting.3. Update Rx descriptor definition.4.
Fix QoS info field of Tx packets in Ad-Hoc mode.5. Use 24e to protect CAM configuration.6. Fix a bug about contention window setting.7. It's the first released beta version.2006.07.211.0191. 'Init from HwParaFile': support partial modify option.2006.07.261.0211. Fix the bug about Rx stopping for defragmentation.2.
Fix roaming bug.3. Review for CCX test plan v3.61, setion 4.7.4.1.2006.07.261.0221. Solve the 'Out of RFD' issue.2. Fix a bug which cause always roaming without indicate DISCONNECTevent up when AP is gone.3.
Change upper limit of off-serving channel measurement.4. Fix a IO bug in setting HWVARCCXCHNLLOAD.5. Don't switch channel for Beacon Table request.6.
Add 8187B demo board MAC and AFE power saving parameters.2006.08.101.0231. Support WMM Power Save.2006.08.111.0241. Regular reision about HW parameters.2006.08.111.0251. Fix Win98SE driver initialzation issue.2.
Regular reision about HW parameters.2006.08.211.0261. Revise CCX Radio Measurement.2.
CKIP implemented.3. Revise HW parameters for AFE power-saving and USB IF.2006.08.231.0271. Turn off AFE power-saving.2. Revise CCX Radio Measurement.2006.08.271.0281. Revised for CCX Radio Measurement pre-test.2006.09.041.0291. Add PSP XLink support.2006.09.051.0311.
Initialize Tx power index according to EEPROM.2006.09.191.0321. Implement CCX functions: Rouge AP, CCKM, Network EAP authentication.2. Support CKIP under WMM.2006.09.261.0331.
Regular revision on HW parameter.2. Revise Aironet IE.2006.09.281.0341. Revise Tx AGC parameters.2. Implement CCX S31 TPC.2006.10.111.0351. Add 87B OEM ID.2. Fix tx out of order problem.3.
Implement 87B high power mechanism.4. Revise bulk in/out behavior for XP SP1.2006.10.301.0361. Support Vista.2006.11.031.0371. Add Netgear VID/PID on Vista.2006.11.071.0381. Fix incorrect channel and frequency on Vista.2. Fix OIDDOT11RTSTHRESHOLD, OIDDOT11RTSTHRESHOLD.3. Add Vista X64.2006.12.011.0391.
Revise power save state issue2. Fix TX nested lock issuew hen unplug the device surprisely.3. Fix driver loading issue.4. Fix connecting to hidden AP issue5. Fix plug/unplug caused scan fail.6. Add RTS, Frag threshold, channel plan, wireless mode, preamble to property setting.
Synaptics Pointing Device Driver Release NotesVersion 13.2.3June 25, 2009-Overview-This document describes changes to the Synaptics TouchPad Driverfor Windows XP and Vista. Only external releases have been documented.Other releases were for internal use, beta tests, or for specific customerrequests.
Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:-Setup Driver at first time:-Windows 2000, XP:Step 1. Before installing the Realtek High Definition Audio Driver, Press theCancel button if Windows detect the Multimedia Audio device.Step 2. Run the setup.exe program to start the installation.Step 3.
Click on Next to continue the procedure. If the Windows popup'Digital Signature Not Found' message, press Yes to continue theinstallation.Step 4.
Finally, select to restart the system and press Finish to completethe installation.Windows Vista, Windows7:Step 1. Run the setup.exe program to start the installation.Step 2. Click on Next to continue the procedure. If the Windows popup'Windows can't verify the publisher of this driver software' message,press 'Install this driver software anyway' to continue the installation.Step 3. Finally, select to restart the system and press Finish to completethe installation.-Update Driver:-Windows 2000, XP:Step 1. Follow Step 2,3,4 described in Setup at first time above to completethe procedure.Windows Vista, Windows7:Step 1.
Run setup.exe, it will remove the original driver in your system.Step 2. Click 'Next' to remove the original audio driver in your system.Step 3. Once after the original driver removed, reboot the computer.Step 4.
Please go back to the new driver package after computer restarted.Step 5. Run setup.exe, it will install the new audio driver then.-Remove Driver:-Windows 2000, XP:Step 1.
Go to StartSettingsControl Panel.Step 2. Select Add or Remove Programs icon.Step 3. Select 'Realtek High Definition Audio Driver' and press Removebutton.Step 4. Click on Yes to finish the uninstallation.Step 5. At the end of the procedure, select to restart the system and pressFinish to complete the uninstallation.Windows Vista, Windows7:Step 1.
Go to StartSettingsControl Panel.Step 2. Select Programs icon.Step 3. Select Programs and Features icon.Step 4. Select 'Realtek High Definition Audio Driver' and press uninstall button.Step 5. Click on Yes to finish the uninstallation.Step 6.
At the end of the procedure, select to restart the system and pressFinish to complete the uninstallation. This document contains the following sections:1.
System Requirements3. Installing the Software4. Verifying Installation of the Software5. Identifying the Software Version Number6. Uninstalling the Software7. Installation Switches AvailableSYSTEM REQUIREMENTS.1. The system must contain one of the following IntelChipsets:Intel(R) Poulsbo Chipset2.
The software should be installed on systems with atleast 512 MB of system memory.3. There should be sufficient hard disk space in thedirectory on the system in order to installthis software.The drivers included with this distribution package aredesigned to function with all releases of MicrosoftWindows. Vista.INSTALLING THE SOFTWARE.General Installation Notes:1. The operating system must be installed prior to theinstallation of the driver.2. This installation procedure is specific only to theversion of driver and installation file included inthis release.3.
This procedure assumes that all of the softwareassociated with this release is located in the samedirectory. Synaptics Pointing Device Driver Release NotesVersion 10.0.12-Overview-This document describes changes to the Synaptics TouchPad Driverfor Windows 9x & ME, Windows NT, Windows 2000, Windows XP and Vista.Only external releases have been documented.Other releases were for internal use, beta tests, or for specificcustomer requests.
Alps Pointing-device Driver provides a convenient way to modifysetting for Alps Pointing-device. The Alps Pointing-device Driveris compatible with most standard mice and similar pointing devices.CONTENTS:1. Driver Installation for Windows 2000/XP2. Using the Alps Pointing-device Property Sheets3. Files On the Setup Disk1. Date VersionNote2006.07.181.0181.
Update OFDM parameter.2. Update dynamic initial gain setting.3. Update Rx descriptor definition.4. Fix QoS info field of Tx packets in Ad-Hoc mode.5. Use 24e to protect CAM configuration.6.
Fix a bug about contention window setting.7. It's the first released beta version.2006.07.211.0191. 'Init from HwParaFile': support partial modify option.2006.07.261.0211. Fix the bug about Rx stopping for defragmentation.2.
Fix roaming bug.3. Review for CCX test plan v3.61, setion 4.7.4.1.2006.07.261.0221. Solve the 'Out of RFD' issue.2. Fix a bug which cause always roaming without indicate DISCONNECTevent up when AP is gone.3. Change upper limit of off-serving channel measurement.4. Fix a IO bug in setting HWVARCCXCHNLLOAD.5. Don't switch channel for Beacon Table request.6.
Add 8187B demo board MAC and AFE power saving parameters.2006.08.101.0231. Support WMM Power Save.2006.08.111.0241. Regular reision about HW parameters.2006.08.111.0251. Fix Win98SE driver initialzation issue.2.
Regular reision about HW parameters.2006.08.211.0261. Revise CCX Radio Measurement.2.
CKIP implemented.3. Revise HW parameters for AFE power-saving and USB IF.2006.08.231.0271. Turn off AFE power-saving.2. Revise CCX Radio Measurement.2006.08.271.0281. Revised for CCX Radio Measurement pre-test.2006.09.041.0291. Add PSP XLink support.2006.09.051.0311. Initialize Tx power index according to EEPROM.2006.09.191.0321.
Implement CCX functions: Rouge AP, CCKM, Network EAP authentication.2. Support CKIP under WMM.2006.09.261.0331. Regular revision on HW parameter.2. Revise Aironet IE.2006.09.281.0341.
Revise Tx AGC parameters.2. Implement CCX S31 TPC.2006.10.111.0351. Add 87B OEM ID.2. Fix tx out of order problem.3. Implement 87B high power mechanism.4. Revise bulk in/out behavior for XP SP1.2006.10.301.0361. Support Vista.2006.11.031.0371.
See All 30 Rows On Www.clevo.com.tw
Add Netgear VID/PID on Vista. How to use this RTLSetup Utility-For Windows ME:1. If the Operating System's New Hardware Wizard prompts you that'New Hardware Found' for the 'PCI Ethernet Controller', you shouldclick 'Next' until 'Finish' is clicked and without specifyinglocation of the driver. You will see the 'PCI Ethernet Controller'in the Device Manager.2. Then you can install or update the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.You need to reboot the system immediately after the Install shieldcompletes the installation/upgrade.3.
Do not click 'Cancel' during New Hardware Wizard searches for thedriver.4. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately.For Windows 2000/XP:1. If the Operating System's Found New Hardware Wizard prompts you that'New Hardware Found' for the 'Ethernet Controller', you should click'Next' until 'Finish' is clicked and without specifying location ofthe driver. You will see the 'Ethernet Controller' in the DeviceManager.2.
Then you can install or upgrade the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.3. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately if you want your networking to be re-installed.
Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.43Installation and SetupDriver & Application Installation/Removal Procedure For Realtek AC'97 Codec:-Setup Driver/Application at first time:-Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press theCancel button if Windows detect the PCI Multimedia Audio device.Step 2. Insert the 'Realtek AC'97 Drivers & Applications' CD into the CD-ROMdrive and run the setup.exe program to finish the installation.Step 3. Click on Next/OK/Go to continue the procedure.
Clevo M761s Driver Update
If the Windows popup'Digital Signature Not Found' message, press Yes to continue theinstallation.Step 4. Finally, select to restart the system and press Finish to completethe installation.The system will reload the drivers and do some adjustments in the INFfile if so required.-Update Driver/Application:-Step 1. Follow Step 2,3,4 described in Setup at first time above to completethe procedure.-Remove Driver/Application:-Step 1. Go to StartSettingsControl Panel.Step 2. Select Add/Remove Programs icon.Step 3. Select 'Realtek AC'97 Drivers and Applications' and press Change/Removebutton.Step 4.
Click on Next/OK/Go to finish the uninstallation.Step 5. At the end of the procedure, select to restart the system and pressFinish to complete the uninstallation.